|
Function features
● The DMX controller(or decoder) output by 4-3 loop access with built-in driver
● It can run 7-graded gradual change automatically while there is no DMX signals input
● Once the address is more than 1,the controller will be under the control by the console and the controller can receive the signals automatically
● Push the button for addresses setting
● In-series connection less than 32 units is allowed
Performance parameter
● Input voltage: DC12V-48V (the detailed voltage is according to the individual lighting fixture's special request)
● Output current: 5A(each circuit)
● Output Gray scale: 256
● Circuit:3
Address setting
● Make sure of the special operating voltage of the lighting fixture
● Turn on the power
● 000 showed in the display of the controller means the controller will follow and work as the already-set information.
● Setting the address by hand : pushing the right button one time will add the address information one time , and the original access address will be showed on the display; pushing the left button will minus the address , Accordingly .
● There are maximal of 512 accesses can be set ,more than 512 will be turned back to 000
Operating illustration
Each controller can drive 15A loading .Please calculate the practical power consumption according to the standard working voltage.For example ,the input voltage of wallwasher is 24V,then ,the max power consumption of the controller should be 24V X 5A X3CH= 360W,by this way ,the controller can drive 20 units 15w parallel connected wallwasher normally .Maxmally 32 controllers can be connected in-series from the signal output port.
Connect way
|
You are at now position:
Support
