The controller is the component of the lighting fixture only.  
 
Parameters  
Working temperature:-20-60℃  
Imput voltage :DC24V  
Dimension:95*65*25mm  
Connecting way:common anode  
Rated loading current:4A per circuit  
Max loading current:6A per circuit  
Channels:3 channels   
 
Control way:wireless controlling  
1.A is the function key ,one time press will be one color changing accordingly ,  
totally 9 color changings included  
 
2.B ,C will work for the jumping change and gradual change .Press B will be   
speed-up ,press C will be speed-down  
 
3.D is the switch key,it can open and close the controller in any condition

Color changing		Performance			Remark
1		static red
2		static blue
3		static purple
4		static green
5		static yellow
6		static cyan
7		static white
8		full color jumping change			press B or C
9		full color gradual change			press B or C

Wiring way:


Red LED will light when power is on ,Green LED(signal indicator) will flash when   
pressed.Normally one time press will be one time flash once the singal was   
accepted .  
 
Notice:  
1.Only DC24V imput voltage will be allowed for the controller  
2.The wireless controller works with 12V battery .For optimum performance pls elongate the antenna.  
3.Connect the wires according to the upper wiring way ,ensure the wires are collectly connected .  
4.Keep all the labels intact for valid claim in case if it is  necessary.  
  
5.There is one year warrenty for the product,during the warrenty time ,the failure products will be replaced or repaired according to the special condition and the validity of the warranty is subject to the correct storage, installation, operation and maintenance of this product.Failing to comply with the storage,installation ,operation and maintenance routines will make the warranty invalid.