|
Characteristics of the Function ●Built-in wireless remote modules for receiving, built-in MCU control program. ●use of wireless remote control signal, so that the product runs dimming process, wireless remote control range 130M; ●The buttons of dimmer are set as: A: on/off switch, B: to gradually, C: to darker ●The address of the receiving and transmitting module can be customized. (The common default address is 001) ●cascade can be used, the largest number of cascade can achieve to 32.
Electrical performance parameters ●Input current: AC90V~264V,50~60Hz 0.3A ●Maximum output: 350mA +/-50mA(current) ●Output load voltage: DC12~26V(with an effective dimmer for load voltage) ●output no load voltage: DC30+/-2V ●Output power consumption: 7W ●Qty of LED in series: 4~7x1W pcs
Interface specification parameters: ●interface specifications of Power input :the type of character "8"(IEC320 TYPE:C8) ●interface specifications of Power output : 2.1*5.5*10mm based socket;(DC JACK) ●interface specifications of Cascade output: based(RJ45)
Environmental conditions ●Ambient temperature of usage: 0~40℃, RH of usage; 20-85% ●Storage temperature: -20~65℃, storage RH: 5-95% ●This dimmer is limited to indoor use of dry environment Instruction of Cascade use Each Dimmer can drive the largest LED load of 7W, power-driven accounted according to the different load voltage of normal voltage, the output interface of product signal can be the largest cascade of 32, with cable connection cascade. (products By the cascade haven't wireless receive modules, so can't be remote controlled).
Surface structure: 1. The forma and operating instruction of the dimmer

2. Instruction of the figure and ports

|