replace fluorescent tube  65W

Specifications:

1, PF:09

2, PC base is use screw fixed

3 ,Use non-isolated inner driver 1pc

4 ,73lm/W,High brightness

5 ,Aluminum + acrylic(Transparent cover) 

Feature:

1) Longer Life than Fluorescent Tube:min 5 years

2) 70%~80% Energy-saving over Fluorescent Tube

3) Solid State,High Shock/Vibration Resistant

4) Work without ballast

5) No RF interference

6) Instant Soft-start

7) Minimum Maintenance Costs

8) Produce Little Heat

9) Rated to Operate from -40F to 122F [-40C to 50C],Perfect for Environments with Extreme Climates

10) Acrylic front cover:never get broken easliy

11) Aluminum back cover: better heat dissipation & thus longer lifetime for the LED

12) Use SMD3528 LED with best lumen maintainance

13) Warranty: 3 years 
Useful Info.
● Price Term: EXW. YJM
● Payment Term: T/T in advance
● Delivery: 10-15 days after order confirmed
● Minimum Order Quantity: 9PCS(One carton)

Quick assembly for installation.

Running without ballast and starter, and putting it to conventional fitting directly. It comes with big cost savings.

Variety of Size.

Tube Light now includes 2.4F, 3.6F, 4.8F, 6F, 7.1F .

Attention:

Please use and install according to the instructions.

Do not hit or press with heavy substance.

Please handle and transport gently.

Do not twist the light when power is on.

The warm light tube is normal when the power is on

Do not touch the lamp when power is on.

Please use it in a ventilation environment and keep it from water.

Do not connect power (positive & negative) to the two pins at one end only. If they are connected together (positive/negative): you will create a short circuit!

Installation:

Can be directly placed in conventional T8/T10 fluorescent bracket, firstly remove the conventional fluorescent lamp, take out the starter and ballast or shoting the ballast connect lines, and then out on the LED fluorescent lamp.

Aging time:

All products must be pass 48 hours aging(continuing lighting) test before shipment.

Applications:
ideal replacement for conventional fluorescent tubes, and the
T10 widely used for: bus, shuttle, railcar passenger interiors,
Interior design uses, Conealed accent lighting, Cubicle,
workbench lighting, vehicle interiors etc

CE,RoHS ,3 years warranty.